Akrapovic exhaust

S1000RR  FORUM

Help Support S1000RR FORUM:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Jambo28

Member
Joined
Feb 5, 2019
Messages
10
Reaction score
0
Anyone know if an akrapovic system off a gen 2 is the link pipe and silencer the same to fit a gen 3 if the link is 65mm also but is the 2-1 link the same ?
 
Gen3 snd gen2 have different sized headers. The exhaust ports are smaller on gen3 afaik.

Sent from my SM-G965F using Tapatalk
 
No problem thanks was just after using the link pipe off a gen 2 on my gen 3 headers as I?ve kinda bent mine
 
Sorry was late and didn't read it carefully.
I would be chrcking part no's on the akra site...if you're trying to decide on if it is worth buying the pipe.

Sent from my SM-G965F using Tapatalk
 
Last edited:
It?s just I?ve seen a full system same style but off a gen 2 just need the link and end can to fit my headers otherwise it?s trying to buy another and the fortunes the end of the link pipe is 65mm on the gen two system need to try measure other 2-1 section
 
I have a gen 2 short stuby on my gen3, just had to have a new link pipe made as angle is wrong.
Dean
 
Back
Top