Track/race geometry generation 1.

S1000RR  FORUM

Help Support S1000RR FORUM:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

fmo

Active member
Joined
Dec 3, 2015
Messages
31
Reaction score
0
Location
Norway
Does anyone have good baseline geometry settings for 09-11 generation 1? Ohlins NIX30 front and TTX rear.

I am thinking rear shock length, ride height, flipped eccentric or not, fork height, swing arm length (sprocket to axle) and so on...

Input on diiferent swing arm pivots and/or linear rear link experiences are also welcomed.



Thanks, Frode
 
Here is what Alpha Racing suggests...


REAR:
Length 312mm (should be ride height 268 measured with special tool)
Top mount of shock Hole down(only with pivot change)
Preload on 95N 10mm
C35 @ 12 clicks
R5 @ 13 clicks
Swingarm length 595-608mm

FRONT:
Position Flat (only topcap visible over triple clamp)
Preload 9mm (=9 turns)
C3 @ 9 clicks
R3 @ 11 clicks
Oil level 135mm (incl. tube)
Use them as a starting point.
 
you cant see this?

REAR:
Length 312mm (should be ride height 268 measured with special tool)
Top mount of shock Hole down(only with pivot change)
Preload on 95N 10mm
C35 @ 12 clicks
R5 @ 13 clicks
Swingarm length 595-608mm

FRONT:
Position Flat (only topcap visible over triple clamp)
Preload 9mm (=9 turns)
C3 @ 9 clicks
R3 @ 11 clicks
Oil level 135mm (incl. tube)
Use them as a starting point.
 
No sorry...., but I am on my phone. Will report back after logging on to a computer👍
 
Back
Top