Results 1 to 5 of 5

Thread: Fitting front indicator to 2018 model

  1. #1
    Standard Member FRS463's Avatar
    Join Date
    Sep 2012
    Location
    Cork
    Riding
    2018 Motorsports
    Posts
    219
    Thanked: 12

    Fitting front indicator to 2018 model

    So found the bike with the front offside/right indicator snapped clean off on the ground today next to the bike.

    Any idea how much they are and where is it wired to as I have the torn 30 to take it off.

    Cheers


    Charlie

  2. #2
    Standard Member FRS463's Avatar
    Join Date
    Sep 2012
    Location
    Cork
    Riding
    2018 Motorsports
    Posts
    219
    Thanked: 12

    Re: Fitting front indicator to 2018 model

    Quote Originally Posted by FRS463 View Post
    So found the bike with the front offside/right indicator snapped clean off on the ground today next to the bike.

    Any idea how much they are and where is it wired to as I have the torx 30 to take it off.

    Cheers


    Charlie
    Should say Torx

  3. #3
    LIFETIME FORUM MEMBER stuartb's Avatar
    Join Date
    Sep 2015
    Location
    Dumbarton, Scotland
    Riding
    HP4 carbon 2013
    Posts
    5,803
    Thanked: 1796

    Re: Fitting front indicator to 2018 model

    Think they're same as Gen 2....OE is about 35 quid from dealer... piss easy to fit, however it's likely you will need to remove side panel, push fit connector into loom just behind Rad... Don't buy aftermarkets as you will almost certainly have to fit an inline resistor to sync winker speed... I've a pair of chinese ones in garage... why because I never listened to my pal Jimmy.. buy cheap buy twice..

    Sent from my SM-G975F using Tapatalk

  4. #4
    Standard Member FRS463's Avatar
    Join Date
    Sep 2012
    Location
    Cork
    Riding
    2018 Motorsports
    Posts
    219
    Thanked: 12

    Re: Fitting front indicator to 2018 model

    Thanks for that

  5. #5
    LIFETIME FORUM MEMBER stuartb's Avatar
    Join Date
    Sep 2015
    Location
    Dumbarton, Scotland
    Riding
    HP4 carbon 2013
    Posts
    5,803
    Thanked: 1796

    Re: Fitting front indicator to 2018 model

    Did someone snap the stalk ?

    Sent from my SM-G975F using Tapatalk

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •