Fitting front indicator to 2018 model

S1000RR  FORUM

Help Support S1000RR FORUM:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

FRS463

Well-known member
Joined
Sep 16, 2012
Messages
240
Reaction score
0
Location
Cork
So found the bike with the front offside/right indicator snapped clean off on the ground today next to the bike.

Any idea how much they are and where is it wired to as I have the torn 30 to take it off.

Cheers


Charlie
 
So found the bike with the front offside/right indicator snapped clean off on the ground today next to the bike.

Any idea how much they are and where is it wired to as I have the torx 30 to take it off.

Cheers


Charlie

Should say Torx
 
Think they're same as Gen 2....OE is about 35 quid from dealer... piss easy to fit, however it's likely you will need to remove side panel, push fit connector into loom just behind Rad... Don't buy aftermarkets as you will almost certainly have to fit an inline resistor to sync winker speed... I've a pair of chinese ones in garage... why because I never listened to my pal Jimmy.. buy cheap buy twice..
fdfb089e9e778293bf1d5820c8b16d0d.jpg


Sent from my SM-G975F using Tapatalk
 
Back
Top