Sprocket Nuts Sizes and Torque Settings

S1000RR  FORUM

Help Support S1000RR FORUM:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

snooker

Well-known member
S1000RR Supporter
Joined
Jan 1, 2015
Messages
219
Reaction score
0
Location
Co Antrim
I'm sure this has been posted before, but I can't find it. I'm about to change the chain and sprokets on my 2015 gen 3 with cast wheels. Can someone confirm the following:

Front sprocket nut: 30mm deep socket and 125 Nm?
Rear sprocket nuts: 18mm socket and ?? Nm?

Thanks!
 
OK, I think I've answered my own question. The front sprocket requires a 32mm socket (is a deep socket required?) and is torqued to 125Nm, with threadlock. Rear requires an 18mm socket and they are torqued to 110 Nm (!) equally, with threadlock.
 
Last edited:
Removed mine couple of days ago. Normal 32mm socket is all you need once tab washer has been bent back.
New tab washer from Ebay was ?7.
No need for thread lock on either sprocket nuts just ensure clean and torque as stated .

Sent from my SM-G960F using Tapatalk
 
Back
Top