Workshop Ramp - Stuartb's Winter Wonderland

S1000RR  FORUM

Help Support S1000RR FORUM:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Re: Discs and pads

At times you don't appreciate the wear on the final drive chainwheel, I forgot to measure the chain under tension...but I'll put it together then see where it's at..I feel the chain will be ok..it's done circa 10k.. rear sprocket needed changed for sure... new rear hoop on and rim nicely cleaned up....
4df1e421f001f4316fbf94d1224e5eb0.jpg
005bb63ab5dd7455e19396fb5c1ac8d6.jpg
7aee7d0ea04dc8334a71e4ff241f6a2b.jpg
f37f9f0be539f5ae349187de1ca0130d.jpg
d75090f9fcd5418ce89d739201c6740c.jpg
44b363396129e2f82ff38bd87fbda061.jpg


Stuart's Galaxy sent this !
 
Re: Discs and pads

At times you don't appreciate the wear on the final drive chainwheel, I forgot to measure the chain under tension...but I'll put it together then see where it's at..I feel the chain will be ok..it's done circa 10k.. rear sprocket needed changed for sure... new rear hoop on and rim nicely cleaned up....
4df1e421f001f4316fbf94d1224e5eb0.jpg
005bb63ab5dd7455e19396fb5c1ac8d6.jpg
7aee7d0ea04dc8334a71e4ff241f6a2b.jpg
f37f9f0be539f5ae349187de1ca0130d.jpg
d75090f9fcd5418ce89d739201c6740c.jpg
44b363396129e2f82ff38bd87fbda061.jpg


Stuart's Galaxy sent this !

Hi Stuart, My rear sprocket looked a bit like yours. I think part of reason for mine was the play due to the worn cush drive rubbers.
Thanks for the post
 
Last edited:
Waiting on cush drives arriving... sprocket mounted and torqued up, wheel balanced.... but my favourite bit tonight... fitting those captive spacers !.. I can see immediately fitting the rear wheel is going to be miles easier, big shout out to Loupe for the heads up..

Captive spacers are right up there with Dummy Tits as THE best VFM Item ever....childless people won't get that comment...

No more wishing I was some sort of 10 minute freak with Three arms....no more wrestling with an axle pin, wobbly spacers, misaligned caliper guide and piece of 4x2 under the tyre...with sweat pissing off my forehead..... and just as the planets align... clunk.... BASTARD !

These should be Mandatory OE ...
2d134bfcb88a25a036b8557007ec8717.jpg
ee2d2ac9af09cf51a75b0e8d7063af2a.jpg
1cfeded9d7541e535830f9b3ebbf8e9f.jpg
1282fa21fef8e5a250ee3084a21b8aed.jpg
a6f62f6022884a147f577a7ce94cd5a1.jpg


Stuart's Galaxy sent this !
 
Hi Paul, the spacer on the gen1 is different; on later models different spacers are needed for cast versus forged wheels. If you buy captive spacers check them carefully against the oem ones.
 
Fitted my Cush Drives, I didn't appreciate just how much the old ones were compressed hence the considerable play, now nice and tight...cleaned up inside of Swing Arm, new EBC rear pads, mounted rear wheel, the easiest ever with those spacers mind you it helped I was working at waist height, I'll be using those captives from now on they really are amazing...

Moved on to stripping body work...hit a rounded fastener and got the Dremel out..pays to have the right tool...

Body work is scabby as feck... that will be this weeks job.
b217032aedebaa25f4eb360c66344718.jpg
17d56b2fd3efe5caf1611473e14f06b7.jpg
c491e236702605db962e0ae617a1fa9a.jpg
b741fe5a6ee9039475d09e522cee56a8.jpg
7528591238405ce922538ec535772b9d.jpg
5ea6092cdedc0538da6e852f0f0b8a0f.jpg
6d782b126dd344013b40f469d06a9e47.jpg
4a9d78fd7503e8446b9b4b2b8cd20532.jpg
20ec0d45583074110ed0a549a74aab75.jpg
 
Last edited:
BTW... check out that main headlamp lens..it's badly crazed..a word of caution if you want to burn +130s... I can only assume that's whats done it, might look at LEDs since I'm sticking on new body work.. I just hit 5k in posts ! Woop woop.

Stuart's Galaxy sent this !
 
Last edited:
Sprocket and brakes are looking good Stuart, although I'd wipe away some of the excess copper grease in case it runs on to the disc :)
Bummer about the headlight, are you going to replace it?
 
My headlamp lense melted on my Gen 3, just ticking over in my garage. Standard bulbs too.
The lenses do get extremely hot even with the OE bulbs fitted.
Luckily I got my headlamp replaced under warranty.
I never let the bike idle for long now, if I can help it.
 
Sprocket and brakes are looking good Stuart, although I'd wipe away some of the excess copper grease in case it runs on to the disc :)
Bummer about the headlight, are you going to replace it?
I am Rob... except the tail unit and the two top Carbon parts I've all new panels...including a complete new nose cone..


Stuart's Galaxy sent this !
 
Back
Top