Results 1 to 1 of 1

Thread: fitting renthal grips on a 17 with heated grips.

  1. #1
    2 YEAR PREMIER MEMBER r25sti's Avatar
    Join Date
    Jul 2012
    Thanked: 421

    fitting renthal grips on a 17 with heated grips.

    few pictures as i was doing it. the 17 is different from my 15 plate as in the throttle dosnt have the wires on the 17 but a printed type board. the l/h and r/h both come off the same, just lightly score with a blade and pull the old rubber away. on the throttle side there are a few little barbs sticking out that i nibbed off with a dremel, the throttle side i have just glued the new grip on with grip glue but the clutch side i have covered the fine heating wires with silicone to stop them from moving as i slide on the new grip. i will let the silicone go off over night before fitting the new grip.

    Last edited by r25sti; 8th December 2017 at 07:08 PM.

  2. The Following 7 Users Say Thank You to r25sti For This Useful Post:

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts