Search results

Lately the engine fault light hasn't been turning off, the bike still run but its low on power and restricted to around 7k rpm. Its an intermittent fault, and the diagnostic tool is recording a camshaft sensor input signal. Anyone else had this on their gen3?

During an evening ride i noticed that there was something funny about the headlights, both sides were lit but only dim, just the side lamps were on. Tried high beam nothing, switched off and on again the bike, nothing still side lamps only. Connectors properly fitted to the headlights, as once i...

After about 15 minutes of riding the bike started to misfire occasionally especially when applying the throttle from closed. The engine never switched off and it happened occasionally, mostly on the 3 lower gears. Not warning lights and checked with the GS 911, no fault codes. Millage is...

Hii everyone, which of the following parts from my existing 2015 model will fit the gen 4 HP folding levers Light-tech chain adjusters Pretty much thats all as for sure the tinted screen and AR exhaust wont fit

Hi guys, it seems that my s1k battery is on the way out, nearly left me stranded twice. Its an 015, so over 5years old. The bike does not include the alarm, should i keep the same size or go a bit bigger? Any recommendations please?

Should i worry or is it normal. Its a 2015 bike, with 16000kms and the oil was approx 1500kms old. Always road riding https://freeimage.host/i/dEs1Wl

https://www.youtube.com/watch?v=0_nUl_LvUF4 ouch, thats one cooked s1k

As most off you know the s1k runs very hot, and it just goes over 100degs as soon as one slows down. Is there a way to lower the starting temperature of the cooling fan? Had a look with my GS911 but couldn't find anything. Has anyone managed to do so?

I have the following on my bike https://www.rg-racing.com/browsebike/BMW/S1000RR/2015/EZBG102BL/#prettyPhoto. Wish to cover in the same material the rest of the frame, but R&G does not have what i need. Maybe someone knows from where i can get the same type of material?

Was out this morning after more than 8 weeks in hibernation, scrubbing a new rear tyre, when after less than 5kms away from home the engine warning light came on, no indication what could have caused it. Nearly shitted myself after what has been posted earlier about dropping of a valve. There...

Hi there, I was resetting my service warning and noticed that there is a fault code 21FA21, tried to reset it but to no avail. Using the Hex code interface, is there a way to get rid of this code

Hi is the a way to find the paint code of a bmw wheel, its a S28BA BMW LA Wheel YSpoke 511 (x1 f48) Yes its for an X1

As per title, due to the strangest accident. Used the compressed air gun to dry the mirror and it popped out and shattered out of the frame. Have an extra one but its for the other side, tried to take the mirror out as it is double side but broke that as well:mad: While here anyone got 4...

Hi all, looking for an x1, 16 or later, anyone has one for sale? Is there an X1 forum?

Hi guys is there anyway i can check a car's history from the reg number? Cheers

Happy belated new year to all. The last time i adjusted the chain lack i must have tightened the nut a bit too much. A glass shard found all the way into the rear tyre, so it had to come off, and noticed that the thread was a bit damaged. It is still 'operational' but would rather play it safe...

Guys i have noticed that the sprocket carrier starts to move sideways (about a mm maybe 2) from 2 to 4k revs. I have been having a 'bad throttle' response especially on closed to partially open throttle on all gears. Any one else have had this problem, and whats the cure lol

Whats the pros and cons for road usage of each tire? i usually stick to what the manufacturer recommends but than why you get tires that are wider than spec?:numbness:

Replaced the header pipes with a decat version, had to remove the cable controlling the double exhaust valve, should the valve be fully closed when the engine is off?

Hi, anyone can shed some light on the manifold nuts, what size as not the normal hexagon type