Recent content by Whitty1000rr

Hi. Would you take ?45 for the brake lever guard ? Mart

That will be why I've not seen you at the TDs lately. Hope all goes well with the recovery.

Cylinder head ?300 Crank (slight mark) ?200 Starter clutch ?50 Starter motor ?45 Clutch cover ?40 Stator cover (complete) ?80 Conrod x4 ?40

Breaking gen1 engine after 4th gear decided to give way. Complete head, engine covers, crank, conrods etc. Message me if your after any parts and I'll see what I have left. Cheers Mart

I run conti and corsa 200/55 on track gen1 with no problems.

Thanks :joyous:

Hi. Anyone know if the coil sticks are the same in a gen1 and 2 ?? Thanks Mart

Hi. Anyone have the alpha race switches for gen1 they want to sell ??

All sorted thanks to stephen. Top bloke would definitely recommend .

Anyone got one they want to sell or is there an easy fix ??. Thanks Mart

+1 for colin at 100%.

Re: S1000rr Stock Wheels The sprocket carriers are different as i found out. I have 2 carriers from s1000rr and they differ where the bearing sits. One requires the smaller inner spacer and bigger captive outer spacer. The other one requires bigger inner spacer and small captive . There is...

Not that clued up on uploading and sites like flickr etc. The configuration is the same as the link you sent with the 28mm spacer .

Ok ! So measured the spacers and its as i thought. The carrier thats on the bike has a 28mm spacer and the spare carrier has a 23mm. Have taken some pics but don't know how to upload them ?. The 28mm is a struggle to get in but eventually it goes ,as the 23mm is a doddle bit leaves a gap ...

Thanks for the info. When i get home from work i will measure the spacers in each of the carriers. Im thinking there's a 23mm in one (came with spare wheels)and a 28mm in the one thats on the bike. Either way one seems slightly tight and the other too slack ???? .