Top tip for blanking the holes after removing the rear pegs.

S1000RR  FORUM

Help Support S1000RR FORUM:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
P

PhilHays

Guest
Bought a packet of 8mm Black Gromet Blanks (£1.80 @ B&Q). The Rear Pegs/Hangers are off, the gromets fit neatly in the screw holes. The frame looks clean and finished well, the screw holes are closed and water proofed... And I didn't have to spend £25 on R&G blanks. Job's a good 'un!
 
Mine were a bit more than £1.80 from D3 components
a5e4e53d.jpg
 
reddevil007 link=topic=617.msg5950#msg5950 date=1331934025 said:
Mine were a bit more than £1.80 from D3 components
a5e4e53d.jpg

+1 ......... Hides the screw holes and are great tie down points when transporting.

If I didn't need to occasionally put the bike in a van I would have gone for the B&Q specials.
 
I just used a couple of pro-bolt black dome allen bolts and washers, nice and neat. :D
 
Back
Top