RR Wheels

Do RR wheels fit the HP4 looking to get a set for the track

Yes,they do,but obviously,you will need the std discs and sprocket carrier.

So the sprocket carrier and disc need to be swapped from the hp4 wheel to the RR wheel?
what about spacers etc does that all swap over as well?

No,discs and sprocket carrier are wheel specific,So,if you use s1000 wheels you will need s1000 discs and sprocket carrier,whilst hp4 wheels need hp4 discs and sprocket carrier.

Mart9 said:

Do RR wheels fit the HP4 looking to get a set for the track

Click to expand...

According to the manual the ddc would need re calibrating at the dealer if you change from the factory spec forged wheels and / or tyre sizes to remain accurate.

soofsayer said:

According to the manual the ddc would need re calibrating at the dealer if you change from the factory spec forged wheels and / or tyre sizes to remain accurate.

Click to expand...

In theory,that is correct-tyre sizes may alter the DTC(it's just a pity the dealer does not have the software to correct it!).However,it shouldn't affect the ddc(which can be calibrated on the clocks anyway).

I have used tyres of all shapes and sizes(obviously,not 185) on the HP4 with no problems at all.

Yes you are right baz, my error, DTC not DDC. Duh. Too many acronyms.

baz said:

No,discs and sprocket carrier are wheel specific,So,if you use s1000 wheels you will need s1000 discs and sprocket carrier,whilst hp4 wheels need hp4 discs and sprocket carrier.

Click to expand...

Thanks Baz