Swingarm Spools

S1000RR  FORUM

Help Support S1000RR FORUM:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Schuey

Well-known member
Joined
Nov 19, 2012
Messages
774
Reaction score
0
Location
Midlands
Just received the BMW Swingarm Spools for the Gen 4 through the post.

No instructions on torque settings etc.. Anyone have any idea on torque settings? And do you guys normally use thread-lock on them?

Thanks.
 
Just received the BMW Swingarm Spools for the Gen 4 through the post.

No instructions on torque settings etc.. Anyone have any idea on torque settings? And do you guys normally use thread-lock on them?

Thanks.

R&G recommend 20nm for their M8 bolts. I've never used thread lock personally.
 
No thread lock, bit of anti-seize, and I thought it was around 12nm for these but could be wrong....
 
Just torque them to a sensible amount so they are tight and you will be fine.
 
Just received the BMW Swingarm Spools for the Gen 4 through the post.

No instructions on torque settings etc.. Anyone have any idea on torque settings? And do you guys normally use thread-lock on them?

Thanks.
Used thread lock, tightened with a sensible force
 
Back
Top