Activity Stream

I have a set of Harris footrest stands which I use if removing the swingarm etc. They only work if you have rearsets with fixed foot pegs fitted, and...

There's no issue but it has been designed to fit onto the existing cat and clamp the standard end can in position. The angle of your new pipe is...

2500

Race number for the 2019 season. The fella who I purchased the bike from has kept his number for this season even though he ain’t racing, well he...

That's a three man lift that.... Nice mate.. S Stuart's Galaxy sent this !

Haha I forgot! I had Evotech levers on it but gone back to standard so just assumed everything would work like it should! Not sure what you mean by...

Just noticed it must have an anti fog coating on it.... doesn't mention in the packaging or manual... aw well all good ! Stuart's Galaxy sent this...

NB: Has to be the easiest visor to change ever... open visor, push button, slide forward...that's it ! Simply slides back into position with a...

Thread update... Just getting my gear together for the season.. Pulled my Bell Race Star out of the box today...just noticed the Pinlock...

What do you use to lift the rear to unload the spring first?

just checked,you didn't.if you had said that,you would have fixed it 5 minutes after your original post ;)

did ypu put the little tab onto your new lever? if not,thats your issue.did you mention you'd changed levers?

indeed,but you know what they say about "ask a silly question...." :)

You're comparing a straight pipe to a very much curved one. - Alex

But you need a way to get the weight off it first, needs a chassis lifter... Bit ott for a clean, I'd use a wheel cleaning brush set of various...

But the issue is at the neck of end can not the other end. I cant see how the cat being removed will effect how guard attaches to the can. Or am I...

Thank you

This ^^^

After doing some googling I have found another possibility, I have changed the levers and thinking there may be an issue with the clutch microswitch...

yeh what i was saying is it will work on the stand ive once fitted a q/s from another bike it was push instead of pull i tried it on the stand and...

Maybe I have the clamp too high up the exhaust. If I come down a bit where it's narrower it may match up ? Mmmm Sent from my SM-G930F using...

Congratulations on your new steed @HPlogger Enjoy!

Congrats HP, you must have one hell of a letter box, lucky man. JimmyMac

It worked perfectly. Then I swapped from R&G rearsets back to the standard parts and it stopped working. I'm no mechanic but know which end of a...

2018 S1000RR Sent from my SM-G950F using Tapatalk

any bike changes on the stand theres no load on the wheel ,

Lightech make coloured paddock stand bobbins and are a good make https://www.lightechuk.com/lightech-swingarm-spools-17129-p.asp - Oli

I reckon Jimmy should sell them on EB under the "Gentlemans Interest" section.... One pair of howling knickers..... free p n p.. ! Stuart's...

This bit Sent from my SM-G930F using Tapatalk